0.20 Inch (5.08 mm) Digit Height Single Digit SMD Display

• Customization: Available
• LED Packaging Type: Chip
• Beam Angle: 120°
• Model NO.: LSD2011A/Bx
• Emitting Color: Single Color
• IP Rating: IP65
• Base Material: Alloy
• LED Chips: Famous Brand
• Certification: RoHS, RoHS and Reach
• Character Height: 0.2 Inch
• Dp Number: 1PCS
• Digit Number: 1 Digit
• Chip Matrial: 4 Element
• Pin Number: 10pins
• Transport Package: Tape and Reel Packing
• Specification: RoHS, REACH
• Trademark: LITEKEY
• Origin: China
• HS Code: 8531200000
• Production Capacity: 1000000PCS/Year

Product Description

0.20 inch Numeric Display_smd type
This is a 0.20 inch (5.08 mm) digit height single digit SMD display. This device uses AS-AlInGap and GaN LED chips (AlInGap epi on GaAs substrate). The display has gray face and white segments.

1. Features
 0.20 inch (5.08 mm) DIGIT HEIGHT
 CONTINUOUS UNIFORM SEGMENTS
 LOW POWER REQUIREMENT
 EXCELLENT CHARACTERS APPEARANCE
 HIGH BRIGHTNESS & HIGH CONTRAST
 WIDE VIEWING ANGLE
 SOLID STATE RELIABILITY
 CATEGORIZED FOR LUMINOUS INTENSITY.
 LEAD-FREE PACKAGE(ACCORDING TO ROHS)

2. Outer Dumension and Internal Circuit Diagram:

Notes :
1. All dimensions are in millimeters. Tolerances are ±0.25 mm (0.01") unless otherwise noted
2. Foreign material on segment <=10mil
3. Ink contamination (surface) <=20mils
4. Bubble in segment <=10mil
5. Bending <= 1% of reflector length
6. Plastic pin's burr max is 0.1 mm 

3. Pin connection

Pin NO.	Connection
	LSD2011Ax	LSD2011Bx
1	Anode E	Cathode E
2	Anode D	Cathode D
3	Common Cathode	Common Anode
4	Anode C	Cathode C
5	Anode DP	Cathode DP
6	Anode B	Cathode B
7	Anode A	Cathode A
8	Common Cathode	Common Anode
9	Anode F	Cathode F
10	Anode G	Cathode G

 

4. Selection Guide:

LITEKEY PN	PART NO.	Color	λd (nm)	Device	Description	Typ.Luminous Intensity Iv/Seg @IF=2mA(ucd)
LSD2011AR	LTS-2307CKD-P	Hyper Red	639	AlInGaP	Common Cathode	560
LSD2011AUR	LTS-2307CKR-P	Super Red	631	AlInGaP	Common Cathode	560
LSD2011AO	LTS-2307CKF-P	Orange	605	AlInGaP	Common Cathode	720
LSD2011AY	LTS-2307CKS-P	Yellow	587	AlInGaP	Common Cathode	720
LSD2011AG	LTS-2307CKG-P	Yellow Green	572	AlInGaP	Common Cathode	720
LSD2011AB	LTS-2307TBE-P	Blue	470	GaN	Common Cathode	3500
LSD2011AW		Cold White	x=0.27	GaN	Common Cathode	8000
LSD2011APW		Pure White	x=0.30	GaN	Common Cathode	8000
LSD2011BR	LTS-2807CKG-P	Yellow Green	639	AlInGaP	Common Anode	560
LSD2011BUR	LTS-2807CKD-P	Hyper Red	631	AlInGaP	Common Anode	560
LSD2011BO	LTS-2807CKR-P	Super Red	605	AlInGaP	Common Anode	720
LSD2011BY	LTS-2807CKF-P	Orange	587	AlInGaP	Common Anode	720
LSD2011BG	LTS-2807CKS-P	Yellow	572	AlInGaP	Common Anode	720
LSD2011BB	LTS-2807TBE-P	Blue	470	GaN	Common Anode	3500
LSD2011BW		Cold White	x=0.27	GaN	Common Anode	8000
LSD2011BPW		Pure White	x=0.30	GaN	Common Anode	8000

5. What max voltage and current you can use to drive it?

Parameter	Electrical optical Characteristics^[1]			Absolute Maximum Ratings^[1]
Emitted color	Forward Voltage @ IF=20mA		Reverse Current VR=5V	Power Dissipation	DC Forward Current	Peak Forward Current^[2]
Per Chip	Typ.	Max.
Super Red	2.0	2.6	30	60	20	100
Ultra Red	2.0	2.6	30	65	20	100
Orange	2.0	2.6	30	65	20	100
Yellow	2.0	2.6	30	65	20	100
Green	2.0	2.6	30	75	20	100
Pure Green	3.0	3.6	30	85	20	100
Blue	3.0	3.6	30	85	20	100
White	3.0	3.6	30	85	20	100
Unit:	V	V	uA	mW	mA	mA

Notes :
1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission
International De L'Eclariage) eye-response curve
2. Reverse voltage is only for IR test. It cannot continue to operate at this situation
3. Cross talk specification <= 2.5%

6. Recommended SMT condition:

NOTES:
1.We recommend th e reflow tem perature 245ºC (+/-5ºC ).The maximum
soldering temperature should be l imited to 260ºC .
2.Don't cause stress to t he epoxy res in while it is exposed to
high t emperature.
3.Number of reflow process shall be 2 times or less.

7. SMD Packing: Blister pack or Tape and Reel Pack

Contact us for more details.

Our QC System:



Factory Overview and production process



Our Services/Why choose LITEKEY                                            

1. Professional service:  replied within 24 hours(at workdays).
 
2. Various ready moldings of lamp led are available: no need to afford extra fee for moldings.
3. We also can provide customized products, design according to your demand.
 
4. Reliable and stable quality: 100% testing for each piece. Automatic testing and bin code selection machine.
5. Experience: produce LED components for more than 14 years.
6. Advanced Equipment: ASM automatic production machines(biggest brand in LED automatic machines)
7. Concentration: We focus on LED research and development, production and sales.