| Customization: | Available |
|---|---|
| Power: | 300W |
| Power Source: | 46-52V/4-6A |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Modular UV light sources 365nm 385nm 395nm 405nm
Chip On Board(COB) UVA LED Module
This emitter is a high-powered, UV-A COB (chip-on-board). In a 32x36.5mm package, this COB has 112 of UV-A LED chips which add up to 400W typical of optical power. This allows for very high density UV exposure (20-25W/cm2) for curing and sanitizing applications and comes in 385nm,395nm ,405nm wavelength.
1. Mercury- and ozone-free
2. Energy saving and long lifespan (Light decay after 20000 hours is below 30%.)
3. Both compact design and high peak illuminance
4. Selectable water and air cooling
5. Selectable wavelength (365, 385, 395 and 405 nm)
6. using LITKEY proprietary LED high-density mounting technology
COB UVA LED MODULE: T3236
| λp | Po | VF | IF | Pout(Φe) | 2 θ 1/2 |
| 365nm | 150-250W | 48-54V | 4-5A | 13-18W/cm2 | 120° |
| 385nm | 200-300W | 46-52V | 4-6A | 20-25W/cm2 | 120° |
| 395nm | 200-300W | 46-52V | 4-6A | 20-25W/cm2 | 120° |
| 405nm | 200-300W | 46-52V | 4-6A | 20-25W/cm2 | 120° |
Why UV LED Curing Has Become a Mainstream Technology?
In the approximately 20 years since ultra‐violet light‐emitting‐diode (UV LED) curing lamps appeared in the market, there have been significant technological advances in LED efficiency and curing lamp performance. The initial challenges have been met and overcome, allowing UV LEDs to gain their place as a mainstream curing technology.
Today, UV LED curing technology is no longer an emerging technology but an enabling technology−one that is bringing a host of advanced capabilities to a wide range of industrial applications. These advances and new capabilities are helping industrial processes be more productive, versatile and energy efficient.
1. Printing
UV inkjet applicaitons(particularly on heat-sensitive substrates) were an early and clear succes for the UV LED curing lamps. Continued development has enabled the UV LED based curing lamp to be the best overall solution for UV inkjet curing applications.
UV LED curing has been adopted in all areas of printing,from digital inkjet to screen,to flexography and even offset.End users are increasingly asking equipment manufactuers for LED options,and the market-leading vendors are responding. confronted with such exciting and rapidly evolving technology,system builders and end users are closely monitoring the ever-changing UV LED curing landscape. Today,UV LEDs have gained their place as a mainstream curing technology throught a wide range of printing applications.
2. Coatings
UV LED curing solutions are being utilized in the coating industry because they offer lower operating costs,enhanced system capabilityes due to being a solid-state device,and enviromental benefits of safer workplace enviroment and no hazardous materials. UV LED technology drastically reduces energy consumption and significantly reduces work-piece sufface temperature. Machines caan be made more compact due to small form factor,speed can be incresed due to consistent UV output;and the diffused nature of UV LED light can be used to more effectively cure shaped surfaces which previously required multipe lamps at various angles. UV curable coating applicaitons include wood and vinyl,automotive,musicaal instruments,fixtures and many others.
3. Adhesives
Adhesive bonding,sealing,and coating processes in factory assembly lines are rapidly upgrading to UV LED curing technology.UV adhesives are a great tool in modern assembly and manufacturing process with UV LED electronic control and stability ensuring excellent results in a wide variety of UV LED adhesive applications from medical devices to the most advanced consumer electronics.
Ultraviolet light-emitting diode curing technology offers signifacant advantages compared to traditional mercury UV curing.As a result,adhesive bonding,sealing,and coating process in factory assembly lines are rapidly upgrading to UV LED curing technology.
UV adhesive curing application segments include electronic assembly,automotive,medical,ammunications,pressure-sensitive films,general assembly,and other manufacturing processes. UV LED curing technology is ideally suited for electronic assembly application. The combination of high-energy UV LED sources with the approprite adhesive enables increased productivity while also provding the ability to cure heat-sensitive materials. Today,many electronics manufacturers use UV LED curing in the production of products such as touchscreens,mobie phones,micro-speakders,and hard disk drives.
More details of the products,send inquiry to get the Specification.
UV LED Module Manufacturers & Suppliers | LITEKEY
Customizing UV LED Light Module Manufacturers & Suppliers | LITEKEY
Our Services/Why choose Us
1. Professional service: replied within 24 hours(at workdays).
2. Various ready moldings of lamp led are available: no need to afford extra fee for moldings.
3. We also can provide customized products, design according to your demand.
4. Reliable and stable quality: 100% testing for each piece. Automatic testing and bin code selection machine.
5. Experience: produce LED components for more than 14 years.
6. Advanced Equipment: ASM automatic production machines(biggest brand in LED automatic machines)
7. Concentration: We focus on LED research and development, production and sales.
){kind=link}